Price
This wheel (the 17x9 NC Kogeki) has been discontinued, but we have a single wheel available at this point. If you want these wheels back, please let us know!
Kōgeki means "attack" in Japanese - seemed appropriate since these are intended for attacking your favorite corners, whether they're on a track or your favorite backroad.
These flow formed wheels are exclusive to Flyin' Miata and built for us by a major wheel manufacturer. They're high-pressure cast for less porosity, then the rim is spun-forged. They were designed specifically for the NC Miata to ensure clearance for all FM and stock brake setups and for the perfect fit under the fenders. If you are running a different brake system, you can use our template to check for clearance.
17x9 Kōgeki clearance template
Because we know they'll be used hard, they're rated for 690 kg (1521 lbs) of load (using J2530 JWL standards). They also have knurling to prevent tire slip.
And seriously, just look at them. Yummy.
You can fit a 225/45-17 or 235/40-17 under unmodified fenders. With a 17x9, you can run a 245/40-17 with some fender rolling depending on alignment.
These are fully compatible with factory TPMS sensors, as well as the sensors we sell. And likely most others, although we can't guarantee that for sensors we haven't tried ourselves.
You can use stock lug nuts and chrome sockets, but it's close - 21mm impact sockets probably won't clear, 19mm impact sockets (as used with our 19mm lug nuts) probably will, but be careful. Chrome 19mm sockets should have plenty of room.
Be sure to order 4 wheels if you want 4.
Also available in 17x8
Specifications:
17x9: 17.5 lbs, +48 offset, 73.1 mm hub bore, gunmetal color only.
We recommend that any wheel used on the track be inspected regularly for cracks and fatigue as part of proper maintenance.
